2010 Toyota Sequoia TRD (Black)
Honestly, probably the largest car that we’ve done since forever. Not by choice, but because we didn’t have the space to accommodate such large vehicles back then. I gotta say though, smaller cars are SO much easier on the body to work on. The goal for this one was to bring as much life to the car as possible in two steps. We didn’t chase the deeper stuff with this one, but the overall results are quite astounding. We topped this off with Opticoat Pro+, as well removed the wheels and coated them inside and out with CS2 Rim. The side SR5 emblems were also removed, and the rear T and SEQUOIA’s were removed and reinstalled after coating.
Optimum No Rinse Wash + Grit Guard & Microfiber Madness Incredimitt
The Last Cut / Rupes LHR21ES 6.5″ Mark II, Flex 7-12-80 / MF Cutting Pad
Optimum Hyper Polish / Rupes LHR21ES 6.5″ Mark II, Flex 7-12-80 / Oberk Yellow
Optimum Hyper Polish / Flex 7-12-80 3” / Oberk Yellow
Optimum Paint Prep
Optimum Opticoat Pro / Microfiber Applicator
Optimum Opticoat Pro+ / Microfiber Applicator
CS-II Rim / Microfiber Applicator
CS-II Dewax
CS-II Water Spot Remover
Shine Supply Smooth Move
Optimum No Rinse Wash & Wax (Jambs)
