2020 Chrysler 300S (Bright White)

2020 Chrysler 300S finished with a two step polish and Opticoat Pro+. This car was actually coated by another shop a couple weeks ago. While it performed well there were high spots everywhere to the point where the owner said the car looked worse after leaving the shop than it did when it went in. And upon further research he found out that whatever coating was installed, the shop wasn’t even an authorized installer for. So, we ended up doing a two step polish to get the mysterious coating off, and replaced it with Opticoat Pro+, a coating that the owner has had before and is familiar with.

• Optimum No Rinse Wash + Grit Guard & Ultra Plush MF

• Optimum Primer Polish / Rupes LHR21ES 6.5″ Mark II / LC Orange

• Last Cut TLC / Rupes LHR21ES 6.5″ Mark II / MF Cutting

• Optimum Hyper Polish / Rupes iBrid Short Neck / Coarse Foam

• Optimum Paint Prep

• Optimum Opticoat Pro / Foam Block / Microfiber Suede

• Optimum Opticoat Pro+ / Foam Block / Microfiber Suede

• CSII Silicone Remover

• CarPro Iron-X

• Nanoskin Autoscrub / ONRWS

• Optimum Opti-bond

• Optimum Power Clean

• Optimum No Rinse Wash & Wax (Jambs)